Achieve Mastery of Medical Concepts

Study for medical school and boards with Lecturio

Power, Conservative & Nonconservative Forces

Power is the rate at which work is done or energy is transferred. Conservative forces can be described by a potential energy function, and the work done by these forces depends only on the initial and final positions of the object. Nonconservative forces, such as friction and air resistance Resistance Physiologically, the opposition to flow of air caused by the forces of friction. As a part of pulmonary function testing, it is the ratio of driving pressure to the rate of air flow. Ventilation: Mechanics of Breathing, dissipate energy and cannot be described by a potential energy function. The Work-Energy Theorem states that the work done on an object is equal to the change in its kinetic energy. Mechanical Advantage is a measure of the amplification of force achieved by using a machine. It is the ratio of the output force to the input force. Efficiency is a measure of the effectiveness of a machine in converting input energy to useful output energy. The efficiency of a machine is less than 100% due to energy losses from friction and other nonconservative forces.

Last updated: Mar 31, 2023

Editorial responsibility: Stanley Oiseth, Lindsay Jones, Evelin Maza

Work-Energy Theorem

W ⇒ work (J or N m)

Work is the energy transfer from one object to another so that the 2nd object can be moved or deformed. As with force, there are several types of work, which are described in the table below.

Work Equation Description
Lifting Work WH WH = FGh
  • Lifting an object at constant speed
  • FG= force of gravity
  • h = height that the object is lifted to
Acceleration Work WB
  • WB = FBs
  • FB = m a
  • Change in the velocity of an object, which makes it move faster or slower
  • FB= acceleration
  • s = displacement Displacement The process by which an emotional or behavioral response that is appropriate for one situation appears in another situation for which it is inappropriate. Defense Mechanisms
Pressure-Volume Work wV wV = –∫ p dV Volume of a fluid is compressed (V2 < V1) or expanded (V1 < V2)

Power

P ⇒ power (W or J/s)

Power describes the amount of energy consumed per unit of time; i.e., it is dependent on time. The performed work and the incoming energy are inversely proportional to time; i.e., with energy remaining constant, power decreases with time.

$$P=\frac{W}{t}=\frac{E}{t}$$
Name Symbol Units Unit abbreviation
Force F Newtons = kg m/s2 N
Energy K, U, E Joules = kg m2/s2 J
Work W Joules = kg m2/s2 J
Power P Watts = J/s = kg m2/s3 W

Conservative Forces

  • Gravity only converts between K and U.
  • Total energy remains constant.
  • The net work done by gravity only depends on initial and final location.
Gravity conservative forces

Image by Lecturio.

Work performed by gravity is the same for any path between the same 2 points.

  1. WGravity = 0 ↑ ↓
  2. WGravity = 0 →
  3. WGravity = 0 ↓ ↑  ↑
Work conservative forces

Image by Lecturio.

Work performed by gravity depends on initial and final locations regardless of path. Energy is conserved.

Nonconservative Forces

Nonconservative forces are forces that do not store energy. They are also known as dissipative forces. For example, when someone pushes a book across a table, the work put into it must be enough to cause the book to move across the table. It must also be enough to combat the friction that occurs in the opposite direction. This nonconservative force does not store energy. The same concept also applies to air resistance Resistance Physiologically, the opposition to flow of air caused by the forces of friction. As a part of pulmonary function testing, it is the ratio of driving pressure to the rate of air flow. Ventilation: Mechanics of Breathing when a plane flies through the sky. These friction-type forces remove energy from the system and are no longer available to the system for kinetic energy.

Nonconservative forces

Nonconservative forces

Image by Lecturio.
Conservative forces Nonconservative forces
The work done by gravity depends on initial and final locations regardless of path. The work done by friction is path-dependent.
Energy is conserved. Energy is not conserved (lost to heat Heat Inflammation).

Dependence on path

In a nonconservative force, the work performed is path-dependent. Work is related to the force exerted on the object and the distance the object travels. In other words, Work = Force x Distance. Because friction is a nonconservative force, the amount of work due to friction depends on the distance traveled by the object that has a force exerted on it.

For example, if 2 boxes need to be moved from point A to point B along the same path, the force needed will be the same for each box. However, if Box 1 is moved in a straight line, and Box 2 is moved up and down an incline to reach the same destination, the force of friction for each box will be different.

Because Box 2 took a longer path, the work required to move it will be higher than the work needed to move Box 1. Work is related to the motion of the object plus the work related to friction. Friction always acts in 180 degrees opposite of motion. It acts against the direction of motion and takes away kinetic energy.

In equation form:

Wfriction = F d cos (180) = –Ff d

Mechanical Advantage

Mechanical advantage is a measure of the force amplification by using a tool, mechanical device, or machine system. A lever (seesaw) and a pulley system are examples of mechanical advantage. The device preserves the input power and trades off forces against the motion to create the desired amplification.

Mechanical advantage

Mechanical advantage

Image by Lecturio.

Levers

A lever gives the ability to trade off distance for a force for given energy input. In this system, energy is conserved. The force that is applied is used to overcome gravitational energy by pushing (using the force) down on the lever. The lever (seesaw) pivots on a fulcrum. If the fulcrum is placed in the middle of the lever, the force exerted on one side will be equally applied to the other side when lifting the object. In this case, the distance between the fulcrum and the force and the fulcrum and the object would be the same.

However, in most instances, the fulcrum is not in the middle. The object is usually closer to the fulcrum than the location where the force is applied. In this case, the force applied is less than the force generated when moving the object. The distances would need to be different to conserve energy. The force exerted is at a farther distance than the object’s distance from the fulcrum.

The formula for the lever system is:

F2d2 = F1d1

Pulleys

A pulley system helps reduce the amount of force needed to move an object. If 2 pulleys are supporting an object with a separate rope, then the force used should overcome the downward force of gravity Fg. In this case, each pulley would exert force Fsuch that:

FT + F– Fg = 0 at equilibrium Equilibrium Occurs when tumor cells survive the initial elimination attempt These cells are not able to progress, being maintained in a state of dormancy by the adaptive immune system. In this phase, tumor immunogenicity is edited, where T cells keep selectively attacking highly immunogenic tumor cells.This attack leaves other cells with less immunogenicity to potentially develop resistance to the immune response. Cancer Immunotherapy. Thus, FT = Fg/2 as the upward force on the object exerted by the 2 pulleys must match the downward force of gravity.

Pulleys

Pulleys

Image by Lecturio.

Mechanical advantage determination

Mechanical advantage is the ratio of the force required without using a machine to the force required when using the machine.

The formula for mechanical advantage is: Mechanical advantage = Fout/Fin.

In the pulley example, it would be Fg/FT = (2 FT)/FT = 2.

Therefore, the pulley system would offer 2 times the mechanical advantage of no pulley system.

Lifting an object straight up an angled ramp will require a lot of force to overcome gravitational force without the creation of a force of friction. However, if we use a ramp to pull the object up a slope to the desired height, the force used will be less but will require some force to be used for the force of friction. Therefore, a slope provides a gradual force over a distance rather than lifting something straight up.

Mechanical advantage = Fg/Fg sin (theta) = 1/sin (theta).

In this equation, theta refers to the angle of the slope. If theta is 30 degrees, then the mechanical advantage using a 30 degree slope = 1/0.5 = 2.

Efficiency

Efficiency is associated with how well the force is used to generate productive work without waste. The key factor that controls efficiency is whether friction is generated in the process. Friction is wasted work, but sometimes it allows for mechanical advantage.

Friction or no friction

In the case of pulling an object up a slope, force is used to not only move the object up the slope but also to overcome the frictional force that is opposite the direction of motion. More work is used to get the object to its final location. However, not all work is used effectively. Some of the work is used to overcome the frictional force due to the object being dragged across and up the slope. This energy is lost in the form of heat Heat Inflammation. Using the slope provides a mechanical advantage over not using a tool to decrease the force exerted on the object.

Efficiency

Efficiency

Image by Lecturio.

Efficiency is determined by looking at the ratio between output work and input work.

If there is no friction in the system, efficiency is 100% because all energy in the system is effectively used—no energy is wasted.

If there is friction in the system, efficiency is < 100% because of the loss of energy in the form of heat Heat Inflammation due to frictional forces. Even though more work needs to be done, this friction provides a mechanical advantage.

Create your free account or log in to continue reading!

Sign up now and get free access to Lecturio with concept pages, medical videos, and questions for your medical education.

User Reviews

Details